PC with USB port to Panel Programming Cable Assembly
			$Call
Part #: EA-MG-PGM-CBL

				PC Programming Cable PC requires RS-232 port
					$Call
Part #: D2-DSCBL

 

 

 

 

 

 

 

 

 

 

Establishing PC to PLC communications

If a USB port is available on the PC, then use an AutomationDirect USB to RS232 PC to
Panel Programming Cable Assembly, EA-MG-PGM-CBL, to connect between the USB port
on the PC and the RJ12 connector on the CPU’s PORT1.

If a 9-pin RS-232 serial communications port is available on the PC, then use an AutomationDirect
PC Serial Programming Cable, D2-DSCBL, to connect between the 9-pin port on the PC and the
RJ12 connector on the CPU’s PORT1.

NOTE: PORT1 on the CLICK CPU module is designed as the primary programming port. The port has fixed communication parameters, so you can always connect the programming software to the CLICK CPU module through the port without any configuration changes.